Table of Content

Drive Modes


Limited Power Mode


Drive Modes

Your vehicle can be set to your preferred driving and regenerative braking modes. You can opt for more comfortable and less responsive vehicle controls in order to increase energy efficiency.

Use the Pilot Panel to select a drive mode by touching .

Smooth

Smooth Mode offers a relaxed and range-focused driving experience with steering, braking, and suspension systems optimized for comfort and a smooth powertrain response.

Swift

Swift Mode is designed for spirited driving. Steering, braking, and suspension systems are optimized for a dynamic driving experience when activated. Furthermore, powertrain responsiveness and available power and torque will also be increased. Drive Mode will return to Smooth Mode upon powering the vehicle off and on again.

Sprint

Warning: It is recommended that this mode is only used by advanced and skilled drivers, in a suitable environment, and with Lucid-specification summer tires installed.

Sprint Mode is designed for short duration bursts of intense performanc and enables the maximum power and torque of your vehicle. Steering, braking, and suspension systems are optimized for stability and control. To use this mode, you must select it and agree to a disclaimer. Drive Mode will return to Smooth Mode upon powering the vehicle on and off again, and the disclaimer requirement will reset.

Note: This mode cannot be selected if the vehicle is using the guest profile. Please login to enable this mode.

Launch Mode

Launch Mode is available only when the vehicle is in the Sprint driving mode Launch Mode maximizes the acceleration of the vehicle from a standstill.

To enter Launch Mode:
  1. First fully press the brake pedal.
  2. Then fully press the accelator while still holding the brake pedal.
  3. To launch, release the brake while still holding the accelator.


Launch Mode pre-loads torque being applied to motors.

To cancel Launch Mode, release the accelator while still holding the brake pedal.

Limited Power Mode

CAUTION: It is recommended that you travel in the lane of slower moving traffic and be prepared to stop, when driving in Limited Power Mode.

Limited Power Mode automatically activates to protect the powertrain if a fault is detected by the vehicle’s drive controller. The vehicle power is reduced and speed and performance are limited, when activated.

An indicator will be displayed on the Glass Cockpit Panel, when Limited Power Mode is active.

Do not panic if Limited Power Mode activates while you are driving. Pull off the road when it is safe to do so and call roadside assistance.

CAUTION: Limited Power Mode should NOT be used for the sustained operation of the vehicle.